Holts Radweld + Total Cooling System Leak Repair 250ml

HOLTS RADWELD PLUS 250ML

Radweld Plus is the total coolant leak repair, specially designed with an anti-corrosion formula that protects and maintains a healthy coolant system whilst eliminating the need to drain the system.

Radweld Plus can be used at home and is simple to use; there's no need to flush or drain the system.

Simply pour in and let Radweld Plus locate and seal the leaks.

• Total cooling system leak repair
• Easy to use, pour and go formula
• Seals in minutes
• No clogging or damaging effects
• Treats up to 21 litres

With the rising cost of car replacement parts, save yourself the money and hassle of taking your car to the garage with Radweld Plus Radiator Leak Repair. 

It couldn't be easier to repair your coolant leak with Radweld Plus all you need to do is pour it in and let it locate and seal the leaks. It seals in minutes, with no clogging or damaging effects.

Radweld Plus is an easy to use, total cooling system leak repair. It works through your system to quickly seal leaks in:

• Radiators
• Engine blocks
• Cylinder heads
• Hoses
• Heater core
• Water pump gaskets

Solve your radiator and cooling system leaks with Radweld Plus.

Holts have been developing automotive repair products to keep you driving since 1919. Our products are developed in our UK laboratories and tested on the road.

Radweld Plus is part of our trusted Radweld range which is guaranteed to work in all vehicles without causing damage.

How to use:

Ensure that the vehicle?s engine is cool before starting the repair process. Park the vehicle in a safe and well-ventilated area.

Before using Holts Radweld Plus, shake the bottle thoroughly to ensure that the contents are well-mixed.

With the engine turned off, pour the appropriate amount of Radweld Plus directly into the radiator or coolant reservoir. Refer to the product label for the recommended dosage based on the system?s capacity.

After adding Radweld Plus, top up the cooling system with the appropriate type of coolant to the recommended level. Ensure that the radiator or coolant reservoir is filled to the specified capacity.

Start the engine and let it run for approximately 10-15 minutes to allow the Radweld Plus to circulate through the cooling system and reach the leak.

After running the engine, monitor the cooling system for any signs of leaks. Keep an eye on the previously identified leak site to see if the Radweld Plus has effectively sealed the leak. It may take some time for the sealant to fully take effect.